Posts Tagged ‘review’
Tuesday, September 15th, 2009

Model – Kayla Knudson
(NOTE: All photos in this review are Copyright Scott Bourne 2009 – All Rights Reserved. All images made with Ray Flash)
There’s only one thing I can say that described the Ray Flash Ring Flash adapter: Cool.
The Ray flash is not a genuine ring flash. Rather, it’s an adapter that turns your speedlight into a ring flash. I tested the Ray Flash on my Nikon SB-900.
The Ray Flash is an un-tethered device that uses a system of internal prisms, reflectors and light-shapers (the company also calls them light channels) to guide the light from your speedlight down and around the lens in an even matter. Note, it’s not as even as it would be were this an actual flash unit itself, but it’s close enough for government work.
it contains no electronics, no flash tubes and requires no batteries or cables.
The advantage of this unit is that it’s lightweight, (weighs just one pound) more portable and less expensive than an actual ring flash. I own other devices like this that work on my studio lights, including one from Bowens. But the Ray Flash is lighter, easier to mount and cheaper to buy.
The simplest application of this device is to throw your subject next to any wall, put the flash in i-TTL (Nikon) E-TTL (Canon), point and shoot. That’s right, you can still use your flash’s automatic and TTL features when employing the Ray Flash.
The light from the unit will be somewhat flat, but you’ll have a cool circular catchlight in the eyes. You might have to experiment with some flash compensation. I typically took off about a half stop, but then again I am very conservative when it comes to flash. I usually just want a kiss of light when I’m the one making the light, i.e., using flash. Your mileage may vary.
The Ray Flash is also great for use in macro and close-up applications. The only thing I’d note is that it seems to lead to lots more red eye than usual, but that can be easily fixed in post.
The un-retouched image below shows off the effect of the unit pretty well. Note the red eye. Also note the slight halo around the subject. This is normal when you use a ring flash. You need to practice with subject-to-background distance to decide how much or little of this halo effect you want.

The unit is plastic but it’s sturdy and feels well made. The company includes a spacer that allows you to make sure the fit on your camera is snug.
The unit shipped to me in a box marked “Fragile” and I don’t want to break it, so the only negative is that it’s not something that will fit easily in your camera bag. I’m keeping it in the original box which I’ll store in my grip bag. It’s a small price to pay to have a simple, go-to light modifier that will really help me if I get into one of those situations where I have to make a perfect shot with less than two minutes prep.
I’m also looking forward to experimenting with it in the future, trying to gel it or take it off camera to see what sort of impact that will have. This is an unconventional accessory and it’s just begging to be used in an unconventional way.

For the $199, you can’t go wrong. Highly recommended.
For more information and to purchase a Ray Flash head to the OPG Store.
Tags: Flash, review Posted in Articles, Equipment Review, Featured Products | No Comments »
Thursday, September 10th, 2009
The Kiboko photo backpack was created with the intent of creating the lightest photo backpack in the market in order to satisfy some of the strictest airline carry-on bag regulations, while not compromising on durability, protection, capacity or features.
The Kiboko is the brainchild of Andy Biggs, an accomplished african wildlife photographer who spends an enormous amount of time traveling, sometimes in very small planes, while leading his African Photo Safaris. Truly this is a bag designed by a photographer, for photographers.
Amazingly, this bag weighs only 4 lbs when empty, yet can hold an impressive amount of equipment. The bag is peppered with an assortment of very thoughtful and unique features, from the nice and big zipper pulls, the diagonally placement of one of the carry handles, to the dedicated storage compartment for the rain cover.
Check out the video review to learn more.
You can get a Kiboko right here at the store http://outdoorphotogear.com.
All footage shot with a Canon 5D MarkII, and Canon EF 24-105 f4 L lens.
Tags: backpack, review, Video Posted in Equipment Review | No Comments »
Thursday, August 27th, 2009
I am a realist, at least I used to be.
By realist, I mean that I like to portray my subjects as they are in real life, with as little embellishment and alteration as possible. I think this changed when I recently received a Lensbaby Composer for testing.
I have to be honest and say that at first I was a little skeptical. Yes I have seen examples of images taken with Lensbabies in the past and I always thought that they were interesting, but not really my thing.
 Primitive foot path along the Haw River, NC
As soon as I received the Lensbaby composer this past Friday, I put it on my Canon 5D MarkII and decided to use it exclusively for the entire weekend. No matter how entrenched my thought processes are and how safe I may feel inside my photographic comfort zone, I am always interested in trying new things, experimenting and challenging myself to see things differently. I figured that the best way for me to really get to know this new tool was to immerse myself in it.
I first started shooting some mundane items around the house, like some of my sons stuffed animals, while I got the hang of manipulating the tilt-shift like movements of this lens. I created some interesting images, but nothing that really struck my fancy. In an attempt at creating some more interesting images. I proceeded to chase my son around and make some images of him, and while he is used to having a camera pointed at him, he just did not feel like it this time.
e
So far my experience had been very unrewarding, so I decided to go and shoot what I shoot best, the outdoors, nature, wildlife. I decided to pack light, very light and just took my camera with the Lensbaby Composer, a small tripod, a remote shutter release and a microphone, and headed down to one of my favorite locations just steps from my house; the Haw River.
With it’s seldom travelled foot paths, plenty of rock formations and scores of wildlife, I knew the Haw River would provide plenty of opportunities to put the Composer thru its paces within my specialty.
For someone like me, who enjoys nature in an unadulterated and undistorted fashion, it took a bit to start “envisioning” the world thru the lens of a Lensbaby; pun intended. Undaunted, I kept at it and experimented as much as I could, I tried all the different aperture rings, which essentially, control the size of the “sweet spot.” I also played with shifting the center of this “sweet spot” by “swinging” the lens, which isolates and brings attention and focus to a specific area of the image. The more I experimented the more I started to get it as I slowly began to “see” like the Lensbaby.
 Haw River, NC
Very soon I started to get excited and try all sorts of different subjects, from the very primitive path I was walking on, to some of the rock and water features on the river. I quickly then turned my thoughts to video. As the new Canon 5D MarkII takes spectacular HD video alongside stills, it proved to be an excellent way to test the look the Lensbaby offered on some video footage. I have to admit that I really liked the selective focus effect the Lensbaby offers on the video. Not something to be used every day, but very effective when trying to convey a moody or dreamy effect.
A few more technical observations: I am not sure why, but found my camera meter to read a little too hot when shooting stills, so I had to dial down the exposure compensation a bit. This Lensbaby Composer features a 37mm thread, which can be used with the myriad of accessories available or with any other standard filters in this size. I myself may need to try their Super Wide Angle Conversion Lens as well as a few neutral density filters for better exposure control on sunny days.
I have to confess that I am really enjoying this Lensbaby and consider myself a convert, and as difficult as it may be to find the room, it will find a permanent space in my camera bag.
You can check out the entire Lensbaby line in the OPG store.
I hope you found this information useful, and as always, if you have any questions or comments use the comments section below or you can reach me via twitter at http://twitter.com/jpons.
Juan
Tags: lens, Lensbaby, review Posted in Equipment Review | No Comments »
Wednesday, August 12th, 2009
I recently gave the Delkin Express Card 34 Compact Flash Adapter a try for Outdoor Photo Gear. Here are my findings.
I chose to try this Compact Flash Adapter from Delkin because I like the idea of having a slimline adapter that I can throw into my laptop PC bag and forget about, rather than the slightly larger multi-card adapter that I have now. The versatility of the multi-card adapter is nice, but the only memory cards I use other than Compact Flash are SDHC cards, and I already have a slot for SDHC cards built into my laptop. I also having an adapter for Compact Flash with no cables helps me to reduce the number of cables I carry, as my multi-card adapter requires a separate cable.
On opening the box, the adapter seems to be built well. There’s some plastic but with aluminum covers on both sides, it seems sturdy enough. I didn’t find the manual too easy to understand. It is obviously an English translation from another language, and it hasn’t been done that well. It says on the box that you need to grab the drivers from the Web, which I did, but when you try to install the drivers, a message saying that the card cannot be found is displayed, despite the adapter already being inserted into my Express Card slot. It took me a little while to figure out that before my laptop computer will recognize the Compact Flash Adapter, you have to actually insert a compact flash card into the adapter. Once you do that, the computer recognizes the adapter and you can run the driver install program.
There are two modes that you can install the drivers in. One is Fast Removal Optimized, and the other is Performance Optimized. As my main aim in these tests was to see how fast the card adapter is, I chose Performance Optimized initially. My test was relatively simple, just wanting to see the raw speed on the transfer of images from the card to the computer. I simply filled a Lexar 8GB UDMA 300x Compact Flash Card with images from my 5D Mark II, and transferred them to the hard drive using Windows Explorer. I didn’t import into Lightroom or anything, I just transferred the files.

There were 314 files in total, filling the usable memory on the card to the tune of 7.4GB. Transfering to my hard drive to 4:18 (four minutes and eighteen seconds) in Performance mode. As I intended to run another test from my USB 2.0 multi-card reader after this, to ensure that multiple transfers of the same files didn’t get any faster due to caching by the OS, I did the first transfer twice. The speed was exactly the same, 4:18, for both transfers.
I then took my USB 2.0 multi-card reader from another well known electronics manufacturer, and transferred the same files from the same CF card to a new folder on the same internal hard drive on my laptop computer. This time, the transfer took 4:58 (four minutes and fifty eight seconds). This means the transfer using the Express Card Compact Flash Adapter from Delkin is around 15% faster than a pretty normal USB 2.0 multi-card adapter. The difference isn’t staggering, but it’s definitely faster.
I then uninstalled the drivers for the CF adapter, and reinstalled them in the Fast Removal Optimized mode, wondering how much slower it would be over the Performance mode, and repeated the transfer, once again, using the same card, with the same files. I was surprised to see that this transfer was actually faster than the Performance Mode, at 4:08 (four minutes and eight seconds).
The driver installer dialog states that “Fast Removal Optimized would disable the Write Cache feature of Windows and the Disk. Performance Optimized would enable the feature.” Thinking about this, why would I even want the Windows Write Cache feature turned on for this card, as my main objective is to Read from it? Apart from when writing a firmware update to a compact flash card, I can’t think of any time that I write data to a card.
Anyway, with Fast Removal Optimized selected, the Delkin Express Card 34 Compact Flash Adapter is 17% faster than my standard USB 2.0 multi-card reader, so that’s a little more significant. At 50 seconds faster per 8GB, when I come in after a day in the freezing cold after photographing Red-Crowned Cranes and Eagles in Hokkaido, and I have up to forty gigabytes of data to transfer, that’s over four minutes faster. And that means I can hit that nice warm Japanese bath four minutes earlier!
Coupled with the fact that Delkin adapter is sturdy, slimline and doesn’t require a USB cable, I’m overall very happy with it, to the point that I can forgive the badly translated manual and the slightly hard to understand logic of the drivers. I’ll definitely be picking one of these up for myself in my next order from Outdoor Photo Gear. Thumbs up!
Tags: Delkin CF Card Adapter, gear, review Posted in Equipment Review | 2 Comments »
Tuesday, August 4th, 2009
About six weeks ago I bought a Lensbaby Composer, and although I released an Initial Impressions review here on my blog straight away, having now had a chance to take it through its paces a little more, here’s a more in-depth review of what I’ve found to be more than a lens. In some circumstances it can be the perfect aid to photographic creativity.
First I’ll touch on some my initial impressions from my first blog post. The first thing that struck me when I opened the box is that the Lensbaby Composer is big and heavy. I don’t mean heavy like a big L lens, but it’s got a good weight. I have a first generation Lensbaby, and a Lensbaby 2.0 and never really like the way they looked on the camera. I use big 5D and 1Ds series cameras, and always have the battery grip on the 5D. To me, the old Lensbabies just looked a little bit too small on the camera, and never felt balanced. This is really not the case with the Composer. It feels very similar in size, weight and overall balance, to having the Canon EF 50mm F1.4 or F1.8 lens on the camera.
One of the other things I noticed quickly is that the Lensbaby Composer has a metal mount. I should have noticed this from the pictures I’ve seen of it online, but I hadn’t. This was another great surprise. Overall, the build just feels great, right down to the knurling etc on the focus ring, and the second ring used to lock the movable Lensbaby head in place.
You can see the metal mount in the photo below as well as the dedicated lens case that you can also buy as an option. The case is very well made and well worth the additional $15 in my opinion.
 Lensbaby Composer with case and aperture rings etc.
The other thing I never liked about the old Lensbabies was the softness of the images. I read on the Lensbaby Web site that the Composer came fitted with the multi-coated Double Glass Optic, from the Optic Swap System, which allows you to change the optics to use the Composer with various lenses. I didn’t buy any other Optics this time. I figured I’d see how much I use the composer first, and also, I wanted to check the build quality, though that’s now behind me.
 Lensbaby Composer on the 5D Mark II
One of the other things that I find geeky about the Lensbaby, in a nice way of course, is that to change the aperture you have to literally change the aperture ring in the front of the lens. As you can see above, the Lensbaby comes with a little plastic holder with a magnet that looks a little bit like a small plastic frying pan with a cap to keep the aperture rings safely inside. You use the magnet to remove the current aperture ring, and then drop in your required aperture ring size, and it is sucked in and held in place by the magnets around the front of the lens. Without any aperture ring the Lensbaby Composer has an aperture of F2, and then you have all the rings for full stops from F2.8 down to F22.
I couldn’t wait to try the Composer out to see just how sharp it was with the new double glass elements, so I grabbed my tripod on that first evening and headed out into a thunder storm to give it a try. The following two images were the results of this tiny excursion into the elements in Tokyo. The first image is number 2287, of the roof tops in the storm. This was taken with the F4 aperture ring installed. Here I lined up the sweet spot, which is where the lens is sharp, with the building on the horizon. I used an ISO of 50 for an 8 second exposure, and the clouds are nicely lit because of the lightening that struck while the shutter was open.
 Tokyo Rainstorm with Lensbaby Composer @ F4.0
I was pretty amazed to see that on closer inspection of the images on my PC later, the area inside the sweet spot was incredibly sharp. The Lensbaby Composer with the Double Glass Optic is as sharp as many of my Canon L lenses. I am very impressed with the image quality. You can also see from this first image that the areas outside of the sweet spot flow off to the edges of the frame really nicely.
So that you can check the sharpness of the lens for yourself, here is a 100% crop of the sharp part of the above image.
 100% crop @ f4.0, 8 second exposure
I wanted to check if the glass was still sharp at F2.8, so I also shot a test image with the F2.8 aperture ring installed, which I uploaded to my gallery as image 2288. Still at ISO 50, the below image was shot with a one second exposure. The first tip for using a Lensbaby here is that sometimes, the most obvious subject in the frame is not always the best one to focus the sweet spot on. Here I moved the sweet spot down onto the rooftops of the houses in the foreground, and allowed the more obvious building on the hill to go out of focus. This works too I think, though it probably comes down to person preference which one you think is the better image. Experiment though by all means. The Lensbaby is in my mind as much a creative tool as it is a lens. Just looking through it and playing is a major part of the fun of this system.
 Tokyo Rainstorm with the Lensbaby Composer @ F2.8
Again, here’s a 100% crop of this image so that you can see how sharp it is at F2.8. I am really impressed with this lens, I can tell you.
 100% crop @ f2.8, 1 second exposure
 Billiard Balls with Lensbaby @ F2.0
I realized while preparing for this review that still didn’t yet have any images shot at F2.0, so I shot some billiard balls (right) to see how the Lensbaby Composer fared wide open. I focused on the 9 ball in the front of the line, and we can see how this has basically enabled me to pretty much get the nine-ball in focus, but then everything else is nicely blurred. Because the Lensbaby has a sweet spot of focus, rather than a line of depth-of-field, parallel to the film plane or your digital sensor, even the felt of the billiard table has very little texture out outside of the immediate surroundings of the nine-ball.
We’ll look at a 100% crop in a moment, but I did want to touch on a technique that I’m perfecting for aligning the sweet spot with your chosen subject within the frame. I have to admit, I don’t find aligning that sweet spot particularly easy, especially when shooting hand-held, as I was here. I shoot most of my images with a tripod, and when using a tripod, especially with live-view, it’s a lot easier. You can move things around while viewing on the LCD, tweak the focus, and then shoot. When shooting hand held though, things are a little more hit and miss, so as I get more practice with the lens, here’s what I’m finding myself doing.
Basically, I straighten up the Lensbaby Composer a little, if it was bent off center that is, and I focus roughly on the subject that I want to align the sweet spot too, then recompose, if the subject is off center, which is usually is. Then I start to twist the Lensbaby around, making sure that I’ve loosened the locking ring at the base of the lens, so that I can freely move it around. As I find my intended main subject in the frame, looking through the viewfinder by the way, I move the sweet-spot around it a little, as it’s easier to see if you have the sweet-spot over your subject when it starts to go back out of focus as you go a little past it. Then you just back up to where you were a moment before. When you think you have it right, you have to fine tune the focus again, with the focus ring at the front of the Lensbaby.
Then, when I have the sweet spot on my subject, I wiggle the camera around a little, pretty much repeating the last step, but with the camera now, rather than bending the lens itself. Again, as you move the camera around, you can see your main subject move in and out of the sweet-spot, and this enables you to confirm that you have that sweet-spot where you really want it. If you find you’re off a little, continue to move the front of the lens around, until you get it right. Another tweak of the focus to make sure you’re sharp, and then you’re good to start shooting. I’m sure with practice, this gets easier and quicker. If you are shooting people or kids that move around, you’ll need to really work on getting the sweet-spot where you want it, then focusing quickly and ripping off your shots.
I wanted to make sure that the Lensbaby Composer was sharp at F2.0 as well, so I took at look at the nine-ball at 100% (below). You can see that the lines around the black nine are very sharp, although you have to bear in mind that these balls are maybe not the best subject to prove this with. I shot this at ISO 400, so it’s just a little bit grainy, but you can certainly tell that the sharpness is there. For a lens of this price, I have to say I’m still very impressed with the image quality.
 100% crop of the Billiard Ball shot at F2.0
For comparison, I shot the same ball with a Canon EF 50mm F1.2 L lens at the same aperture, F2.0. The Lensbaby is said to have a focal lens of around 50mm too, which is why I chose the Canon 50mm to compare it with. Both shots were made hand held, and I actually changed the ISO to 200 for the below shot, because you get a little bit of light drop off with the Lensbaby as you twist it off center, but I wanted to keep a similar shutter speed. This means though that there is no grain to speak of in this image. You can see that the overall look is a tad softer with the Canon lens. There’s definitely a nice quality to the Canon 50mm image, but it shows that the Lensbaby Composer is definitely as sharp as its competitors in that sweet-spot, if not sharper.
 100% crop shot with a Canon EF 50mm F1.2 L lens at F2.0
Let’s move on now to some other example images that I’ve been capturing since getting my Lensbaby. Next up is image number 2297 (below), that I shot in a small town way up north called Joboji. I took a drive up a country road that I found on my last visit, and noticed this abandoned shack in the woods. Now I have to admit, I am still sometimes turning to the Lensbaby as a means to an end, rather than it being my first choice. I have to really embed it in my work-flow before I can truly work with this lens. Here though, there was a thick black power cable running across the top of the scene. You can just about see it in the blur, running from the top right corner, down past the top of the shack just before the blue of the sky starts, then down to about a third of the way into the image from the top as it makes its way to the left of the frame.
 Shack in Woods (Lensbaby @ F5.6)
 Kudan (Nine Steps) Falls (Lensbaby @ F11)
I reached for the Lensbaby Composer, as I knew that it would help me to make the cable go away. I used the F5.6 aperture ring, for a wider sweet-spot, which I aligned with the side of the shack and a little of the foreground. This gave me a pretty eary image, with the trees in front of the shack, and the tree trunk and foliage to the left running out of the frame nicely. I was pretty pleased with the result, and pleased that the cable made me think of the Lensbaby.
I’d shot some other images between the previous one and the next we’ll look at, and I’ll put a link in the show-notes to show not only all the Lensbaby images I’ve made so far, but it will also pick up everything I shoot from now on as well. Next though, image 2311 (right), is another image where the subject demanded that I use the Lensbaby. I found these falls just off the track as I walked along the Oirase Mountain Stream recently, but there were these fallen logs and branches in the front of the falls, and I was not entirely impressed with the surroundings.The foreground was boring, and I just didn’t think it would work ‘straight’. I used the F11 aperture ring for a very wide sweet spot, as I really wanted to blur just the outer edges of the image. I also wanted a longer shutter speed, and F11 helped me to get to 3/5 of a second. I’m pretty pleased with the resulting image, and again, I think the Lensbaby helped me to make something of what I would otherwise have walked away from.
The last example image that I wanted to look at is of the Oirase Mountain stream itself, in image number 2314 (below, right). Here I was standing with my tripod legs perched precariously on three separate rocks, with the camera standing over the fast flowing water. Probably not the best spot to change out lenses, but I decided to try a shot of this with the Lensbaby before I moved on. Again, using the F11 aperture ring, I think I also held an ND8 neutral density filter in front of the lens here to give me a 4/5 of a second exposure at ISO 100. I may have done that for the last shot as well, but I’m not sure. Anyway, again here the large sweet spot has given us lots of the scene in focus, but the outer edges are all blurry, giving us a nice creative feel to the image.
 Oirase Mountain Stream (Lensbaby @ F11)
So, to summarize my overall impressions of the Lensbaby composer, on the plus side, I really like the way you can now focus the Lensbaby with a focus ring, like a traditional lens, and the focus mechanism is totally separate from the adjustment of the sweet spot. I have both the Lensbaby 1.0 and 2.0, though I skipped the 3rd generation War of the Worlds model. I never liked the fact that you had to keep your hands on the 1st and 2nd generation lensbabies though, both to focus them and to adjust the position of the sweet-spot. All of that is behind me now though, with the Lensbaby Composer, and as I say, with the new double glass optics, the Lensbaby Composer is tack-sharp in that sweet-spot. The addition of the sturdy little lens case, albeit an optional purchase, also adds a lot to the overall usefulness of the lens. I can drop it into the inside pocket of my photographer’s vest, so it’s always with me.
I only have a couple of very small little peeves, though for the price I am more than satisfied. One thing is that when you turn the locking ring to lock the front of the lens in place, it sends the focus off. If it held focus when locking it down, it would almost be a little too good. I’m finding that I’m applying just enough tension with the locking ring to stop the front of the lens from flopping around, but not so much that I can’t move it, and just leave it like that.
The other thing is more an enhancement request than a problem, but I’d really like the Composer’s optional lens case to have a belt loop. It’s great as it is, but with a belt loop I could have quick and easy access to the Lensbaby Composer while walking around town or on location etc.
Apart from these two tiny things though, having now used the Lensbaby Composer in the field for a while, it’s still a big thumbs up. With the new optics, this really is now ready for the serious photographer that wants his or her images to be tack sharp where they need to be, but still being able to have fun with the overall creativity of this wacky little lens.
Podcast Show-notes:
All of Martin’s Lensbaby Composer shots: http://www.martinbaileyphotography.com/thumbnails.php?album=search&search=Lensbaby_Composer
Music from Music Alley: http://www.musicalley.com/
[podcast]http://www.podtrac.com/pts/redirect.mp3?http://www.bokeaji.com/podcasts/MBPP_Ep202.mp3[/podcast]
You can also download the Enhanced Podcast M4A files directly.
Tags: Lensbaby, review, Tips and Tricks Posted in Equipment Review, Podcast, Tips and Tricks | 1 Comment »
Thursday, July 23rd, 2009
Over the past few weeks I have had the opportunity to use and test the newly released Apex Bean Bag from Essential Photo Gear.
I have used bean bags for quite some time and find them indispensable when shooting wildlife from a vehicle. I have found bean bags to be a superior solution for in-vehicle mounts for several reasons, but most importantly because they provide a significant amount of vibration isolation compared to hard mounts, and for their versatility, you can use a bean bag in multiple situations not just when in a vehicle.
For the past 5-6 years I have been using a nice and simple bean bag from Kinesis, and it has served me well. It is of a decent size and has some useful features such as grip pads at the bottom and a strap to secure the bean bag to the vehicle. I even recommended this bean bag to the participants of my most recent photo workshop “Winter in Yellowstone”. However, I was disappointed to see that the strap that is so essential to securing the bag to the vehicle is no longer included in their “updated” design. A very regrettable omission.
Although traditional bean bags have worked well for me, I have often wished for a better design that provided both a more stable platform as well as multiple lens mounting options. This would be a bag that I would use mostly at those locations where I expect to use the bean bag a significant portion of the time; in places like Yellowstone and Pocosin Lakes NWR.
Enter the Apex Bean Bag:
 Apex Bean Bag with a Gimbal Head
When I first saw images of this bean bag, I have to admit, I was skeptical about it’s non traditional design, also the bag looked way too big and too heavy, and I was not sure I really would want to have my gimbal tripod head on this thing. One of the advantages of using a bean bag is the speed at which you can take a shot after stopping and turning off your vehicle, since normally I would simply leave the bean bag draped over the window opening on the door and place the lens right on top. Having a tripod head would mean I would need to mount the lens on the head and then balance it, something that normally takes time. However as I thought critically about my bean bag usage, I realized that I just as often take some quick shots and move on as I linger on those more cooperative subjects. For those times that I linger, I have found the traditional bean bag a hassle, for two reasons, first I have to constantly have a good grip on my lens and camera, as it is very precariously balanced and could easily fall if I am not paying attention, and second, the traditional bean bags most often do not provide enough “lift” from the window sill, and consequently I find myself peering thru my viewfinder with a crooked and tilted head. Oftentimes this translates into crooked images.
The Apex Bean Bag solves both of these problems, read on to find out how.

After receiving my review sample from EPG I quickly wanted to inspect the packaging and workmanship of the bag, and I have to say that I was very impressed. Right away it was clear to me that EPG took great care and pride in both their packaging and workmanship of the bag, packaging was simple but effective, minimizing the amount of waste, something I very much appreciate. The Bean Bag itself came in a simple and tough “zip lock” type bag and included some straightforward but welcome instructions. Included in the package were:
- The Bean Bag itself
- Instructions on filling and usage
- Metal Plate with treaded screw in it’s own pouch
- One white and one black (not pictured) nylon washers

The workmanship on the bag is top notch, and it’s readily apparent that a lot of thought went into the design of this bag. The material used on the underside of the bag is very grippy preventing the bag from slipping once mounted on your vehicle. Additionally, two pockets, one large and one small, as well as an attachment loop have been designed into the bag providing some very handy extra storage and attachment options.
For a filler material I normally use bird seed, more specifically black oil sunflower seed. The reason for this is that I normally have lots of it for my bird feeders, it’s readily available and when I travel I am able to discard the seeds before retuning home while at the same time provide some of the local birds with a nice meal.
Filling a bag of this size takes a lot of sunflower seed. When filled my bag weighs in at 13.5 lbs!

Filling this bag is a two stage process. Because of it’s U shape, you want to fill the “leg” opposite the fill zipper first. Once that side is full, you then want to position the bag upside down and completely fill the “leg” with the fill zipper, as illustrated in the pictures above.

Once full, you can slip in the aluminum plate with the threaded bolt. You would only use this plate when using a tripod head. When resting your lens directly on the bean bag you want to remove the plate and store it in the included pouch.

One of the best features of the Apex Bean Bag are the straps sewn into each leg, these straps provide a very easy and convenient way to securely fasten the bag to your vehicle (or anything else), preventing the bag from slipping or falling, and allowing you to drive short distances without worry.
At the beginning of this article I mentioned that one of the drawbacks of traditional is that they oftentimes do not provide enough “lift” from your vehicle window sill causing you to look thru your cameras viewfinder in an uncomfortable position. The Apex Bean Bag when full, provides approximately 4 inches of lift from your window sill. Depending on your vehicle and your height, this could be a good thing or a bad thing. Let me explain:
I am of average height (5′ 8″) and have a smaller SUV (Honda CRV), when I use the Apex Bean Bag with my gimbal head Version II, the “lift” or height of the Apex Bean Bag works against me, as the camera is just a bit too high, very close to the vehicles ceiling, thus forcing me to lift myself a bit from my seat to be able to look thru the viewfinder. However, when placing my lens directly on the bean bag, with no plate, or with when using the Really Right Stuff BH-55 ballhead, the “lift” is just perfect for me.
 Top Left: Gimbal Head, Top Right: RRS BH-55 and Wimberley Sidekick, Bottom Left: RRS BH-55, Bottom Right: No plate
As illustrated in these series of images, you can see that when using either the gimbal head or the Really Right Stuff BH-55 ballhead and the Wimberley Sidekick the camera and lens combination is too high for me based on both my vehicle and my own height. When using just the Really Right Stuff BH-55 ballhead or simply placing the lens directly on the bean bag with out the plate, the height works much more in my favor.
 Top Left: Gimbal Head, Top Right: RRS BH-55 and Wimberley Sidekick, Bottom Left: RRS BH-55, Bottom Right: No plate
Here is another view providing an unobstructed view of the support systems.
 Top Left: Gimbal Head, Top Right: RRS BH-55 and Wimberley Sidekick, Bottom Left: RRS BH-55, Bottom Right: No plate
One more view, this time from the inside of the vehicle.
Your experience may be different than mine, mostly dependent on your vehicle, your height and what kind of adjustments your vehicle seat provides.
Besides using the Apex Bean Bag draped over your window sill, as illustrated above, you can invert it and use it as an incredibly stable support for your long lenses from any flat surface, by placing your lens between the two legs of the bean bag. I can tell you from experience that this provides a much more stable platform than a traditional bean bag. So much so that I don’t hesitate leaving my 500mm lens cradled by the bean bag on my vehicles hood. Just make sure to remove the aluminum plate before placing it in the inverted position, or the threaded screw will do a nasty job on your vehicle.
At $129.95, the Apex Bean Bag is pricier than other bags, however the versatility offered by this bean bag is unparalleled in my opinion, as it provides you with more mounting & support options than any other bag.
Overall I have to say that I am very pleased with the Apex Bean bag and HIGHLY recommend it. I think it is truly an innovative design that addresses some of the most pressing shortcomings of traditional bean bags. Having said that, this does not mean that I will be trowing away my old bean bag, it will still come in handy on some occasions, specially when needing to travel light, but for the bulk of my bean bag use I will be relying on the Apex Bean Bag from now on.
You can purchase your own Apex Bean Bag directly from Outdoor Photo Gear at: http://www.outdoorphotogear.com/store/apex-bean-bag.html.
As always, if you have any questions or comments use the comments section below or you can reach me via twitter at http://twitter.com/jpons.
Juan
Tags: bean bag, review, support systems, Wildlife Posted in Equipment Review | No Comments »
Tuesday, July 14th, 2009
I recently ordered a Lensbaby Composer, and after spending almost a week in the current very crowded Tokyo customs facility, it arrived today. Excited like a little kid, I left the office as early as possible, and then ate dinner itching all the time to open the little package to my right. After clearing the dishes away, I finally got the nod that I could open my new toy. Yes!
 Lensbaby Composer with case and aperture rings etc.
The first thing that struck me when I opened the box is that the Lensbaby Composer is big and heavy. I don’t mean heavy like a big L lens, but it’s got a good weight. Then I realized that it has a metal mount, which I should have noticed from the pictures I’ve seen of it, but hadn’t. This was another great surprise. Overall, the build just feels great, right down to the knurling etc on the focus ring, and the second ring used to lock the movable Lensbaby head in place.
Note that the dedicated lens case in the above photo is not included with the Lensbaby Composer. You have to buy this separately, but this too is well made and well worth the $14.95 extra in my opinion.
I have a first generation Lensbaby, and a Lensbaby 2.0 and never really like the way they looked on the camera. I use 5D and 1Ds series cameras, and always have the battery grip on the 5D, and the old Lensbabies looked a little bit too small on the camera, and never felt balanced. This is really not the case with the Composer. It feels very similar in size, weight and overall balance, to having the Canon EF 50mm F1.4 lens attached.
 Lensbaby Composer on the 5D Mark II
The other thing I never liked about the old Lensbabies was the softness of the images. I read on the Lensbaby Web site that the Composer came fitted with the multi-coated Double Glass Optic, from the Optic Swap System, which allows you to change the optics to use the Composer with various lenses. I didn’t buy any other Optics this time. I figured I’d see how much I use the composer first, and also, I wanted to check the build quality (which is now behind me).
I couldn’t wait to try the Composer out to see just how sharp it was, so I grabbed my tripod, and headed out in a thunder storm to give it a try. The following two images were the results of this tiny excursion into the elements.
 Roof-tops in a Rainstorm with the Lensbaby Composer @ F2.8
 Tokyo Rainstorm with Lensbaby Composer @ F4.0
After really just a handful of shots, I can’t say for sure, but the Lensbaby Composer seems to have nicer bokeh around the edges than the previous Lensbabies, and the sweet spot is reeeeaaaally sweet, and by that I mean sharp! The double glass really does improve the image quality of the Lensbaby. Here are a couple of 100% crops from the above photos. Now, bear in mind that these were shot at 10 and 8 seconds respectively, in a torrential rainstorm. I reckon these are pretty sharp.
 100% crop @ f2.8, 10 second exposure
 100% crop @ f4.0, 8 second exposure
I really like the way you can now focus the Lensbaby with a focus ring, like a traditional lens, and the focus mechanism is totally separate from the adjustment of the sweet spot, though you do have to refocus after you adjust it. I like to shoot on a tripod, and take my time over composition, and fine tune the focus etc. That was not possible with the Lensbaby 1.0 or 2.0. All of that is behind me know, and I feel as though the Lensbaby Composer has now finally made the Lensbaby a serious artistic tool for our photography toolbox.
I haven’t tried any of the apertures smaller than f4.0 yet, and the conditions tonight weren’t great, so I’ll definitely update you again when I’ve had a chance to use the lens under more normal conditions. Right now though, from the build quality, feel and all important image quality, I’m very pleased that I picked up this lens. I can’t wait to shoot with it again!
My only tiny little peeve, though for this price I am already way more than satisfied, is that when you turn the locking ring to lock the front of the lens in place, it sends the focus off. If it held focus when locking it down, it would actually be a little too good. I think my working style will probably involve adding just enough tension to stop the front of the lens from flopping around, but not so much that I can’t move it, and just leave it like that, and not actually lock things in place most of the time. That should give me the best of both worlds.
Another enhancement request, rather than a peeve is that the Composer case that I also bought would be even better if it had a belt loop. It’s great as it is, but with a belt loop I could have quick and easy access to the Lensbaby Composer while walking around town or on location etc.
Anyway, apart from these two tiny things, it’s a big thumbs up all round for the Lensbaby Composer. Go buy one!
By the way, I’m giving a Lensbaby Composer away to one of the winners of the MBP Photography Assignment too!
Tags: Lensbaby, review Posted in Equipment Review | No Comments »
|
 |
|