Strobies Multi Fit TTL 32 ft Off Camera Flash Cord
Using one TTL Flash:
Attach the cord to the camera's hot-shoe connection.
Place a manufacturers or fully compatible TTL enabled flash on the opposite end of the cord, turn on the camera and flash select TTL mode. This enables all functions of TTL to be used. Should you connect another flash to the multicord, TTL functions will be disabled. However wireless operation is still maintained if it is not connected directly to the cord.
Using two Flashes (non-TTL functions):
Attach the cord to the camera's hot-shoe connection.
Place a flash on the opposite end of the cord and also on top of the camera mounted multicord. Then, turn on the camera and flashes. Select MANUAL MODE on both the camera and flashes. When you release the shutter both flashes will fire.
Cleaning and care:
Do not use benzene, thinner, or other alchoholic agent to clean the unit. Wipe with a soft cloth to clean the cord and contacts. This product is not water resistant. Keep dry and away from rain, snow or humidity.
Always switch off your camera and flashes when connecting or removing the multicord or flashes.
