Hydrophobia 300-600 V2.0 protects the camera and allows full operational use when the rain cover is deployed.
300-600 V2.0 pre-mounts to the lens hood to be quickly deployed during
inclement weather. If bad weather is intermittent, the rain cover can
stay in the pre-mounted position but pulled out to cover the camera when
The rain cover
can be attached while the DSLR is attached to the lens. To deploy from
the pre-mounted position, loosen the red elastic cord at the bottom,
then simply pull the rain cover fabric out from underneath the flap.
Pull the fabric completely over the lens and the camera, attaching the
neoprene eyepiece collar around the eyepiece. Finally, close the
weatherproof zipper at the bottom and cinch the elastic cord tightly
around the monopod.
A clear flap is
designed to cover the Hydrophobia eyepiece while the camera is not in
use. The flap prevents any droplets from falling into the viewfinder
and obscuring vision when ready to shoot.
Hydrophobia 300-600 V2.0 now offers a larger clear window on back for increased view of the camera and LCD screen.
Version 2.0 also
features a tethered lens hood cover to keep moisture or debris from
hitting the front lens element, while the camera is not being used.
camera strap retainer is located on the inside of the rain cover, near
the camera. Fold or roll the camera’s strap, then tuck it under the
strap retainer to store neatly.
The elastic cords on the rain cover can now be tightened or loosened by single-handed operation.
eyepiece can be stored in the dedicated eyepiece pocket to prevent it
from being accidentally misplaced. (Eyepiece required and sold
The right and
left hand sleeves are placed strategically to allow full control of the
camera and lens functions, including manually focusing the lens. The
arm sleeves are both oversized to accommodate for bulky outwear and
gloves during extreme weather.
attached, the Hydrophobia 300-600 V2.0 will still allow the DSLR to turn
vertically in either direction, for right eye or left eye preference.
can be attached either by opening the rain cover or inserting the
teleconverter through an arm sleeve. Hydrophobia 300-600 V2.0 has
plenty of room inside for detaching the DSLR and connecting the
Change memory cards without removing the rain cover.
A 600mm lens extension sleeve is included for use with a 600 f4 or 800 f5.6 lens.
A mesh carrying bag is included for transportation and storage.
Dimensions: 25" long x 8.5" in diameter (63.5 x 22 cm)
600 mm Extension: 7.75" long x 8.5" diameter (20 x 22 cm)